Metallic Texture just by painting
Water paint that can express texture like iron and metal just by painting.
It is recommended for furniture and a variety of goods.
6 Colours and Multi Primer:
Iron Black 200ml
Iron Brown 200ml
Antique Gold 200ml
Antique Silver 200ml
Antique Bronze 200ml
Light Gold 200ml
Coating area (single coat)
6 colors(all) 2 – 2.4 m²
2 colors (black · brown) 5-6 m²
Multi primer 4-4.5 m²
Iron Black 500ml
Iron Brown 500ml
Multi Primer 200ml
IRON PAINT:
Name of product: synthetic resin paint
Application: Indoor wood, metal, hard PVC, plastic, paper, cardboard
Ingredients: synthetic resin (acrylic resin), pigment, preservative, water. Organic solvent (propylene glycol)
Estimated drying time: 1 to 2 hours
HOW TO USE IRON PAINT:
Use: wood, hard PVC, paper, cardboard (In case of metal or glass, use Multi Primer as primer)
1. Stir well before use.
2. Use concentrate liquid only. (If it is difficult to spread, dilute the paint with about 0 ~ 5% water and mix well.)
3. Hold a brush vertically, dab spots onto the surface so that the surface appears slightly uneven.
* To create the look of genuine iron, paint a little thicker, or paint twice is recommended.
Notes on using Iron Paint:
· Remove dirt, oil, mold etc. on the surface to be coated.
· When using, shake container well, stir well.
· When the viscosity of the paint is high and it is difficult to paint, dilute it slightly with water (up to about 5%).
· Paint does not adhere to material. Check in advance.
· Painting on metal requires undercoating such as Multi Primer.
· It does not adhere to olefin type materials such as polyethylene and polypropylene.
· Once attached to clothing, paint cannot be removed.
· After use, wash the utensils thoroughly with water, do not allow to dry.
· Avoid painting at temperatures below 5 ° C.
· Please replace lid of the remaining paint, avoid direct sunlight and places below minus 5 ℃.
MUITI PRIMER:
Name of product: synthetic resin paint
Application: Coating primer
Ingredients: synthetic resin (acrylic resin), silica, rust inhibitor, water.
Estimated drying time: 20 to 30 minutes at 25 ° C (touch dry), 1 to 2 days (complete dry)
Dilution ratio: 0 to 20% (brush, air gun)
HOW TO USE MULTI PRIMER:
It adheres well to metals, glass, concrete, plastic, painted surfaces etc. to improve adhesion of iron paint.
1. Remove dirt, oil, dirt, etc. on the coated side. Stir well before use.
2. For a thinner finish, paint one to two times.
Do not paint thickly on concrete, mortar, calcium board (gypsum board) etc. for porous surfaces, add water and finish by applying 2 coats.
3. Allow to dry for 2 hours and then apply the top coat. In case of glass allow 1 day.
* Since types of base materials are diverse, be sure to try it in an inconspicuous place before use.
Notes on using multi primers:
· Always seal paint, and store in a cool dark place.
· Care of brush, do not allow to dry before rinsing.
· Keep out of reach of children.
· There is no anticorrosive effect against iron.
· It can not be used for polyolefin (PE, PP), nylon, soft PVC.
· It does not adhere to silicon-based or fluorine-based water- and oil-repellent coating.
· Take measures to remove old film coatings.
First aid:
· In case of eye contact, wash immediately with plenty of water and seek medical attention as soon as possible.
· In case of accidental swallowing, please consult a doctor as soon as possible.
· If it gets on your skin, wash it off with soapy water, and if there is a change in pain or appearance seek medical attention.